Mounting a HAM UHF/VHF Antenna

Anyone that knows radio knows that a good antenna is key to success in transmitting and receiving. Once I decided to get a radio, I knew I had to buy a decent antenna and mount it as high as possible. My wife said I could get an antenna as long as it didn’t block her view, so I decided on an antenna that wasn’t too big and might provide me with decent communication. I decided to get a Diamond X50A antenna which is about five and a half feet tall. After getting the antenna, I temporarily mounted it to a deck we have outside our bedroom on the second floor; I fashioned a mounted out of some plywood and 2x4s such that I sandwiched the railing supports between the wood. I was pretty impressed with myself for coming up with a working solution out of scrap material.

While this worked, I wanted to mount the antenna higher. My options were to put it on the roof or to mount it to the side of the house. As I believe we have a 30′ height restriction where I live (imposed by the city) and I didn’t really want to get on the roof, a roof mount was not my preferred option. I asked my father for some help and we spent about 45 minutes looking at how to mount it and came up with a plan that involved various brackets, drilling into the house, and being up on a ladder (neither of us was keen on the ladder). Once we came downstairs and were looking at the backyard, my dad noticed the dried bamboo I have lying around and starting thinking about how we could use the bamboo as a pole. After a few minutes of discussion, we came up with a plan that involved a trip to Home Depot to get $4 in parts. Yes, our solution involved parts that I already had.

Installation was pretty straightforward as I already had the basic mounting setup. I am pretty pleased with the result and the antenna is performing quite well. Of course mounting it higher would yield better results, but this solution was quite easy, didn’t put any holes in the house or roof and can easily be removed if need be. This mount is also not too noticeable that it would raise concern with my neighbors.

IMG 0219

IMG 0220

IMG 0221

Antenna Over House

One Reply to “Mounting a HAM UHF/VHF Antenna”

  1. Fantastic! I was just thinking about using some bamboo we have around in this area — I think this may provide the solution I’m looking for. Our area/neighborhood doesn’t have much in the way of height restrictions (at least, none that I would come close to…), and no HOA to speak of.

    Way to make use of what you already had around you!

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.